2012-2018 Ford Focus

FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product.  It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.

CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer).  It is intended to direct bolt on these products without any additional paint and/or bodywork.

FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer).  It is intended to direct bolt on these products without any additional paint and/or bodywork.

CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.

FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.

Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.

Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.

Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.

The flares can be attached via silicone/epoxy; or bolted on using proper hardware.

FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product.  It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.

CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer).  It is intended to direct bolt on these products without any additional paint and/or bodywork.

FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer).  It is intended to direct bolt on these products without any additional paint and/or bodywork.

CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.

FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.

Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.

Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.

Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.

The flares can be attached via silicone/epoxy; or bolted on using proper hardware.

FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product.  It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.

CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer).  It is intended to direct bolt on these products without any additional paint and/or bodywork.

FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer).  It is intended to direct bolt on these products without any additional paint and/or bodywork.

CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.

FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.

Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.

Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.

Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.

The flares can be attached via silicone/epoxy; or bolted on using proper hardware.

FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product.  It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.

CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer).  It is intended to direct bolt on these products without any additional paint and/or bodywork.

FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer).  It is intended to direct bolt on these products without any additional paint and/or bodywork.

CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.

FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.

Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.

Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.

Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.

The flares can be attached via silicone/epoxy; or bolted on using proper hardware.

FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product.  It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.

CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer).  It is intended to direct bolt on these products without any additional paint and/or bodywork.

FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer).  It is intended to direct bolt on these products without any additional paint and/or bodywork.

CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.

FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.

Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.

Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.

Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.

The flares can be attached via silicone/epoxy; or bolted on using proper hardware.

FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product.  It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.

CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer).  It is intended to direct bolt on these products without any additional paint and/or bodywork.

FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer).  It is intended to direct bolt on these products without any additional paint and/or bodywork.

CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.

FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.

Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.

Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.

Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.

The flares can be attached via silicone/epoxy; or bolted on using proper hardware.